Can you build an ADU in Winston-Salem, NC?
The source set does not include the current supplemental use standards for accessory dwelling units. A secondary non-municipal source mentions sub-750-square-foot ADUs and impact fees, but that is not enough to treat ADU zoning as confirmed current law.
Confidence: low · Last researched June 2026
Dimensional standards in Winston-Salem, NC
| RM-5 Residential Multifamily District - Single Family — minimum lot area | 5,000 — As shown in UDO-CC25 table; unit label in source is square feet. |
| RM-5 Residential Multifamily District - Single Family — front setback | 15 — As shown in UDO-CC25 table; unit label in source is feet. |
| RM-5 Residential Multifamily District - Single Family — rear setback | 15 — As shown in UDO-CC25 table; unit label in source is feet. |
| RM-5 Residential Multifamily District - Single Family — one side setback | 5 — As shown in UDO-CC25 table; unit label in source is feet. |
| RM-5 Residential Multifamily District - Single Family — combined side setbacks | 15 — As shown in UDO-CC25 table; unit label in source is feet. |
| RM-5 Residential Multifamily District - Single Family — street side setback | 15 — As shown in UDO-CC25 table; unit label in source is feet. |
| RM-5 Residential Multifamily District - Duplex — minimum lot area | 7,000 — As shown in UDO-CC25 table; unit label in source is square feet. |
| RM-5 Residential Multifamily District - Duplex — front setback | 15 — As shown in UDO-CC25 table; unit label in source is feet. |
| RM-5 Residential Multifamily District - Duplex — rear setback | 15 — As shown in UDO-CC25 table; unit label in source is feet. |
| RM-5 Residential Multifamily District - Duplex — one side setback | 7 — As shown in UDO-CC25 table; unit label in source is feet. |
| RM-5 Residential Multifamily District - Duplex — combined side setbacks | 15 — As shown in UDO-CC25 table; unit label in source is feet. |
| RM-5 Residential Multifamily District - Duplex — street side setback | 15 — As shown in UDO-CC25 table; unit label in source is feet. |
| RM-5 Residential Multifamily District - Twin Homes — minimum lot area | None |
| RM-5 Residential Multifamily District - Twin Homes — front setback | 0 — Footnote indicates buildings must be set back minimum fifteen feet off front and side street right-of-way. |
| RM-5 Residential Multifamily District - Twin Homes — rear setback | 0 — Zero values are subject to table footnotes and building-spacing rules. |
| RM-5 Residential Multifamily District - Twin Homes — side setback | 0 — Zero values are subject to table footnotes and building-spacing rules. |
| RM-5 Residential Multifamily District - Triplex Multifamily — minimum lot area | 9,000 — As shown in UDO-CC25 table; unit label in source is square feet. |
| RM-5 Residential Multifamily District - Triplex Multifamily — front setback | 15 — As shown in UDO-CC25 table; unit label in source is feet. |
| RM-5 Residential Multifamily District - Triplex Multifamily — rear setback | 15 — As shown in UDO-CC25 table; unit label in source is feet. |
| RM-5 Residential Multifamily District - Triplex Multifamily — one side setback | 10 — As shown in UDO-CC25 table; unit label in source is feet. |
| RM-5 Residential Multifamily District - Triplex Multifamily — combined side setbacks | 20 — As shown in UDO-CC25 table; unit label in source is feet. |
| RM-5 Residential Multifamily District - Triplex Multifamily — street side setback | 15 — As shown in UDO-CC25 table; unit label in source is feet. |
| RM-5 Residential Multifamily District - Quadraplex Multifamily — minimum lot area | 11,000 — As shown in UDO-CC25 table; unit label in source is square feet. |
| RM-5 Residential Multifamily District - Quadraplex Multifamily — front setback | 15 — As shown in UDO-CC25 table; unit label in source is feet. |
| RM-5 Residential Multifamily District - Quadraplex Multifamily — rear setback | 15 — As shown in UDO-CC25 table; unit label in source is feet. |
| RM-5 Residential Multifamily District - Quadraplex Multifamily — one side setback | 10 — As shown in UDO-CC25 table; unit label in source is feet. |
| RM-5 Residential Multifamily District - Quadraplex Multifamily — combined side setbacks | 20 — As shown in UDO-CC25 table; unit label in source is feet. |
| RM-5 Residential Multifamily District - Quadraplex Multifamily — street side setback | 15 — As shown in UDO-CC25 table; unit label in source is feet. |
| RM-5 Residential Multifamily District - 3- to 6-Unit Townhouse — minimum lot area | None |
| RM-5 Residential Multifamily District - 3- to 6-Unit Townhouse — front setback | 0 — Footnote indicates buildings must be set back minimum fifteen feet off front and side street right-of-way. |
Related questions
What are the setback requirements in Winston-Salem, NC?
Setbacks vary by district. Examples — RM-5 Residential Multifamily District - Single Family front setback: 15 (conditions apply); RM-5 Residential Multifamily District - Single Family rear setback: 15 (conditions apply); RM-5 Residential Multifamily District - Single Family one side setback: 5 (conditions apply); RM-5 Residential Multifamily District - Single Family combined side setbacks: 15 (conditions apply). Always confirm the exact yard requirements for your district with Winston-Salem, NC.
What is the minimum lot size in Winston-Salem, NC?
Minimum lot size depends on the zoning district — RM-5 Residential Multifamily District - Single Family minimum lot area: 5,000 (conditions apply); RM-5 Residential Multifamily District - Duplex minimum lot area: 7,000 (conditions apply); RM-5 Residential Multifamily District - Twin Homes minimum lot area: None; RM-5 Residential Multifamily District - Triplex Multifamily minimum lot area: 9,000 (conditions apply).
How tall can buildings be in Winston-Salem, NC?
Height limits are set per district — RM-5 Residential Multifamily District - Single Family maximum height: 40 (conditions apply); RM-5 Residential Multifamily District - Duplex maximum height: 40 (conditions apply); RM-5 Residential Multifamily District - Twin Homes maximum height: 40 (conditions apply); RM-5 Residential Multifamily District - Triplex Multifamily maximum height: 40 (conditions apply).
Full investor analysis
You've seen the general rule. The full Winston-Salem, NC report shows which districts allow ADUs by-right vs. by special permit, the approval path and timeline, and the overlay/flood constraints that quietly kill ADU projects here. First town report is free.
Get the full Winston-Salem, NC report free →More about Winston-Salem, NC zoning
- Can you build a duplex in Winston-Salem, NC?→
- Are short-term rentals allowed in Winston-Salem, NC?→
- Is mixed-use development allowed in Winston-Salem, NC?→
- What are the setback requirements in Winston-Salem, NC?→
This summary is AI-generated from public municipal sources and is not legal, engineering, or land-use advice. Always verify zoning with Winston-Salem, NC officials before making decisions.
More North Carolina zoning reports →